There's a box at the edge of the shaft, and inside the box are two gears.
Above is a frame, and on the frame there's a box containing an electric motor that drives the gear assembly.
The frame is built very solidly, making it difficult for the motor or gears to shift position.
The motor, gear assembly, and shaft were completed quickly.
The blades and the slots they are installed in were also quickly made.
Next, the slots need to be attached to a pipe.
The process is somewhat troublesome.
Finished within a day.
It doesn't look very good.
Install the blades as well.
The blades are easy to remove and are very sturdy.
Next, these components need to be installed on the frame.
The shaft needs bearings.
Since soil flies around during plowing, a double layer of protective measures against soil is necessary. Using two small bowl-shaped washers should adequately protect the bearings.
Bowl-shaped washers are also installed outside the gear box to shield against soil.
